Pool maintenance can be much easier if you have an automatic pool cleaner. This device helps you to keep the water clean and free of debris without the need for manual effort. In this guide we explain how to use an automatic pool cleaner correctly and what steps to take to get the most out of it.
Prepare your pool before using the automatic pool cleaner
Before starting the cleaner, it is important to prepare the pool:
- Remove leaves, branches or large objects that could obstruct the device.
- Make sure that the pool’s filtration system is working properly.
- Check that the pump has the minimum power required for the model of cleaner you are going to use.
- Connect the cleaner to its power source (this can be the pool pump or a pressurised water supply).
Correctly position the automatic pool cleaner in the pool
Insert the cleaner into the water and make sure it is completely submerged. On some models, it is necessary to prime the circuit before starting cleaning, so check the manufacturer’s instructions.
Turn the cleaner on and monitor its operation
Once the cleaner is ready, turn it on and let it run for the recommended time, which usually varies between 1 and 3 hours depending on the size of the pool and the level of dirt.
During this time, it is advisable to monitor its path to check that there are no blockages or errors that prevent effective cleaning.
Clean the filter and maintain the cleaner
When the cleaning cycle is complete:
- Turn the cleaner off and remove it from the pool.
- Empty the filter and remove any accumulated debris.
- Clean the equipment before storing it to ensure it is in good condition for the next use.
Be sure to check the manual for your model of automatic pool cleaner, as some steps may vary depending on the manufacturer.
Using an automatic pool cleaner is a practical and efficient way to keep your water clean all season long. By following these steps, you will improve the life of the device and enjoy a pool in perfect condition with minimum effort.
Comments
Sus datos serán tratados por MANUFACTURAS GRE S.A. y por FLUIDRA S.A., con la finalidad de gestionar sus comentarios y dudas en el blog y, en su caso, ponernos en contacto con Usted para solucionarlas. Puede consultar más información sobre el tratamiento de sus datos y cómo ejercer sus derechos, tal y como se describe en la Política de Privacidad.